حاجب الضوء عن العدسة .. كتاب التصوير علم وفن

Lens hood

This visor is a funnel made of black metal or rubber. It is mounted on the lens to prevent any peripheral rays that do not enter into the image structure, and thus prevents the formation of light halos and internal reflections in the camera. There is a special visor for each lens so that it does not interfere with the angle of view of the lens. For example, it is correct to use a designer eyebrow! Wide-angle lens, otherwise it obscures part of what the lens sees, and a black ring appears around the image. No to a standard lens with .

This visor helps protect the lens from impact and children's fingers

infiltrated

Camera holder

There are many types, the most important of which are:

(a) Tripod camera holder: In choosing this holder, it must be stable and strong, and for this, unfortunately, it is preferable that it be heavy. And it must be tested before buying by extending it to its maximum length, then pressing it with both hands, and trying to move the camera level in a circular motion. If the pregnant woman falls or moves, it is better to buy another one.

Some of these tripods are equipped with a middle tube that holds the camera's level as it goes up and down with the camera. It is called an elevator.
The most important thing is that the camera is equipped to take any position in the three dimensions, and each position has its own key. As for the type made of a ball and a right, it is preferable not to use it because it is prone to slipping

No small stand for table-top use. .tripod: This tripod is longer than an inch and its advantage is its small size and weight. If we grasped it firmly and pressed it against a table or a wall, it was completely stable. But don't leave him carrying the camera alone because he might fall with the camera. Take the shot up

(B)

(c) Camera Clamp: This is a clamp with a flat surface for the camera, and it is attached to a chair or a tree branch, etc. It is useful in some cases and is light in weight. It is preferable to include it in the contents of the photographer's bag. And some types can install feet on it to become like the aforementioned small stand

a (e) Extension tubes: These are three tubes of different lengths, but their total length is about 50 mm. This is the normal camera lens or with the macro lens for close-up shooting of small objects by installing tubes between the camera and the lens. And when photographing a subject using the standard three-tube regular lens together, the size of the subject’s silhouette on the film can be the same size as it is in reality, i.e. 1:1. used with the camera

(Dr)

Gadget bag: it is preferable that it be large in size and that its cover be with a flap and not with a zipper, and it is preferable that it be divided from the inside and that these sections be adjustable. Put a layer of thin sponge around each section to prevent friction and collision between the different devices.
(f) Extension bellows: This is a bellows made of bent skin that works like extension tubes, but in a flexible way. It is used to obtain images that are more enlarged than the truth. It works in the range 1:3 to 12:1.

(g) Cable release: This is used to release the camera's trigger. It is on the stand to prevent vibration, so the longer it is, the better. There are other types, including those that work with air pressure, and some that work electrically with some cameras

(H) Self timer: self timer: This is usually built into the camera, but in cameras where it is not present, it can be purchased separately to press

Trigger automatically. after a specified period

(i) lens cleaning set: a brush of camel hair with a blower for blowing dust. Lens cleaning papers. Means for cleaning lenses, as well as a piece of chamois leather for polishing the lenses after

Completely cleaned

(j) Black Velor Curtain: This is what you will find to be needed in many cases when you desire a black background.