كاميرا بولورويد 10 ,20 , 30 lnstant ١-a .. كتاب التصوير للهواة

Instant 2 - The type of camera is called:

10 Instant, Instant 20, and Instant 30, and there are three models. Each camera model has special features and is used for a specific movie. It uses flash cubes and batteries of a type

Camera volts

In the first model, it uses only 88 films, while the Instant 20 uses films 87 and 78, and the Instant 30 cameras use films 105, 107, 108, 87 and 88, and all of them use color and black and white films.
camera parts

1 - Latch (ratchet) the back cover

Loop slit (pull bar) film.

voting device

- a lens.

e - the photoresist button.

6 - electric eye

Lighten / darken switch

Flash cube click

9- Flash veil

- 1. Distance scale

-11 ring handle

12- Flash field guide (normal flash cubes).

Special equipment:

-1 Movie selection tool

2- A means of fixing the tripod.

Film packing:

In order to pack the film you are using in the camera, you need to loosen the back cover latch of the camera, open the cover fully, insert the stack of film, and make sure that the white loops (strips) are not caught between the stack of film and the camera body. Close the cover and secure its latch (ratchet). (The black one is straight on and along to the outside of the camera.

Preparing the camera for photography

Film type: Cameras equipped with a film selector must be changed to 75 or 3000 according to what is stipulated in the used film instructions.

Lightening and darkening key:

Set it to Normal unless you want to intensify or darken a still image of the same subject under the same lighting conditions. Then the key was rotated

towards the direction of lightening or darkening

distance scale:

For 88, 108, and 105 films, determine the distance between the camera and the subject, and switch the scale on the lens accordingly. For 87 and 107 films, you have to change the scale to
Infinity ( ) for distant views, as for the rest of the other images, the scale is fixed at 1.5 meters.

Blind button solution:

It is turned counterclockwise and locked when the camera is stored or taken with you

How to hold and operate the camera:

Hold the camera and fix the subject within the frame you want to appear in the final image shown, press the shutter button softly and slowly without moving the camera and leave it pressed for about one second and then release

Shooting in daylight:

On sunny days, you should stand in such a way that the light comes from behind you or from your side, and do not take pictures facing the sunlight, and the light luminance of the subject and its background should be on the same level in general, as uneven lighting may mislead the electric eye of the camera and make your pictures too light or too dark too much.

Flash photography.

Use normal or high-wattage flash cubes when the flash screen is installed. Hold the flash cube at a 45-degree angle and rotate it

Clockwise until it stops, where one of the flashes appears in the direct forward direction, and the flash cube rotates until after each flash is consumed, and after the fourth flash, the cube stops at an angle of 45 degrees. All you have to do to unscrew the cube is to drag it directly to the outside.

flash field:

Do not take flash photos at a distance of less than 1.2 metres. with whom

Flash tips:

Try to put the person you are photographing in front of a bright, light-colored background, and when you take a picture of a group of people, try to make each of them an equal distance from the camera to secure equal lighting

The flash should not be used to take pictures when the atmosphere is cloudy with gases or dust that may burn or give sparks.

The importance of heat:

The photos must be developed according to the correct time period, and here the temperature affects the development time. When the temperature is lower than 18/9/C, you have to develop the color images within the cold protective incubator attached to each camera. The cold incubator was heated by placing it inside a pocket.