التصوير الفوري ١-a .. كتاب التصوير للهواة

Instant photography

The idea of ​​instant photography began more than thirty years ago as an urgent need for a person who could not wait for the film to finish filming and developing it, and the first to focus his attention on that was an American company called Polaroid Company. And that was since 1948, so instant black and white films were created, and then when the color film appeared, it took its role in its emergence as well.

Of course, there is a special machine for instant photography, and here are some types of cameras with their own films
1- Type cameras

3000 2000 1000

All these types have the same method of use, except that the 2000 model determines the distance by estimation and has a moving lens, unlike the 1000 model that has a fixed lens, while the 3000 model determines the distance and aperture according to the imagination rule (matching the two lenses).

It is an easy-to-use camera:

You just have to set the camera and press the button.

(Fig. 1)

The image is expelled out automatically, and it is developed and printed in front of you

Camera parts:

A - Viewfinder B - Flash arm housing.
C - lens

d - lock button

.

Film door latch

f - image exit slot

g Control the degree of illumination.

H - electric eye

i - image counter

K - hole for mounting the tripod.

l - neck strap

M - the serial number (inside the camera).

How does a camera work

Film composition:

The camera works with Polaroid S film. X70 Each film box gives ten color photos and also contains a battery to operate the camera and to install the film, push the latch forward to open the film door. Hold the film canister only by its edges, and insert it completely into the camera. Close the film door, keeping your fingers away from the photo exit hole, and then immediately remove the film cover. . Photography machine

To remove the empty film tray. Open the movie door. And pull the can with the yellow handle

Photo counter:

The counter moves to number (10) when entering the film and closing its door, and after you take a photo, the counter will determine the number of photos remaining in the film box, and after you take the tenth photo, the counter is empty and the camera stops working. (If a partially used or empty container is entered, the counter will also move automatically to number (10).

How to hold the camera:

Hold the camera in the palm of your left hand and never place your fingers in front of the image exit hole or the electric eye

See the subject matter:

Look through the viewfinder. And make sure you can see all four corners of the image area. Stand in a place so that the scene to be photographed is in the viewfinder, and the distance should not be less than 1.2 meters, and in the case of using flash, the distance should not be more than (2.4) meters.

How to take the picture:

Position the subject carefully in the viewfinder frame. Place your right index finger on the shutter button and fold the remaining fingers into the palm of your hand. To hold the camera still, press your right thumb firmly on the image counter. Hold the camera steady and gently press the shutter button
The button is pressed until the image comes out of its slot. Peel off the photo that acidifies itself, in the light before your eyes, and do not fold, wring, or cut the photo

Flash image:

The flash was used for internal or external photography when the daylight was not sufficiently clear or other lighting conditions mentioned under the heading “Using the flash” in daylight, or using Polaroid flashes of the type of ten lamps, as they are specially designed for your camera. Insert the flash lever. In the housing at the top of the camera and after the five lights on the first end have burned out, turn the flashes over to use the other five lights.After all the lights on the side facing the shooting position have burned out, the camera will stop working, so no movies will be lost and if you insert flashes you will have been partially used. The camera will automatically select the new lamp.

Never use the flash in an atmosphere containing gases or dust

It may ignite with the resulting spark

Electronic flashes are currently available, and they may not work well and it is not recommended to use them. Remember the following three points when using a flash: Camera
1- You must stand within the limits of the flash distance:

The range of the flash (flash) is 1.2 - 2.4 meters, and if the distance is less than that, then the lighting is very intense and the image is not clear, but if the distance is more than that, the image will be illuminated

Very weak

2- The background is very important:

The subject of photography should be located near a light colored background as much as possible, in this way both the subject and the background are good for lighting. .

Organize the groups well

All people in the group should be at the same distance from the camera to ensure that they are illuminated by the flash equally

External pictures:

Do not stand so that the distance between you and the view is less than 1.2 meters on sunny days, stand so that the sunlight is behind you or to your side. Do not photograph directly in sunlight. In general, the subject and background illumination should be equal. Inconsistent illumination may deceive the eye of the electric camera, which measures the light it sees coming from the scene and determines

Close for photography accordingly, and if a large part of the background is darker than the main subject,