كيفية جعل الصورة براقة ولامعة .. كتاب التصوير للهواة

Chapter Nine

How to make the image bright and shiny

To make the image shiny, we must find a mirror, then wash it with hot water, then dip it in talcum powder. Thus, we have prepared the mirror to make a shiny image, but before that, the image must be placed in an acid composed of the following materials:

1- Hot water

50 Celsius 1 liter

2 - soda

50 gr

They mix well, then the image is placed in the previous acid, and it remains in it for 5 to 10 minutes, then we put the image on the mirror, then dip it with a rubber towel or sponge until it absorbs the solution or acid that is on the image, then let the image dry until the mirror leaves itself, and if we look at the image we find it It has been polished and then it is cut with the scissors designated for that and it is ready to be seen...etc

Safety measures against poisoning from chemicals:

1 Incorrect use of toxic substances and the length of their use.

Breathing smoke from chemicals.

-

- Taking the materials with the spoons designated for that

The acidification and imprinting process must be completed by the individual wearing gloves

Rules to be observed to avoid poisoning:

Rubber with hands

In the absence of gloves, hands should be lubricated with Vaseline. After placing the hands in the appearance, they should be washed in a state of 4 1

Water well

There must be first aid materials used in the event of poisoning.

Washing utensils in the laboratory.